Welcome,
Guest
. Please
login
or
register
.
February 07, 2012, 03:39:40 PM
Long Range Shooter Forums
Front Page
Forum Index
Arcade
Help
Search
Login
Register
Long Range Shooter Forums
>
General Category
>
Long Range Hunting
>
Barrel length???
Pages: [
1
]
« previous
next »
Print
Author
Topic: Barrel length??? (Read 749 times)
AZBOB
Newbie
Posts: 11
Barrel length???
«
on:
April 11, 2011, 07:58:37 PM »
What barrel length would you recommend for hunting elk and deer at 800-1000 yards with a 300 win. mag caliber? I have a 22" rem 700 BDL right now, but was thinking more in the lines of a 24-26? Any and ALL suggestions will be greatly appreciated.
Logged
Sean P.
LRS Host
Administrator
Sr. Member
Posts: 432
Re: Barrel length???
«
Reply #1 on:
April 11, 2011, 08:38:20 PM »
Increasing the barrel length will increase your muzzle velocity which will help a bit.
A very rough rule of thumb is 50 fps per 2 inches.
How tight of groups are you shooting right now?
Logged
"History will look upon the Act depriving a whole nation of arms as the blackest." = Gandhi
AZBOB
Newbie
Posts: 11
Re: Barrel length???
«
Reply #2 on:
April 11, 2011, 08:44:28 PM »
I'm about 7/8" -1-1/8" off sand bags at 100 yds. What should I be at to consider this rifle as a candidate?
«
Last Edit: April 11, 2011, 09:39:52 PM by AZBOB
»
Logged
Sean P.
LRS Host
Administrator
Sr. Member
Posts: 432
Re: Barrel length???
«
Reply #3 on:
April 12, 2011, 06:35:23 AM »
With that grouping you could do ok to about 600 yards but I would like to see at
least
half that for 800 to 1000 yards. Do you reload your own ammo or do you buy factory?
Logged
"History will look upon the Act depriving a whole nation of arms as the blackest." = Gandhi
AZBOB
Newbie
Posts: 11
Re: Barrel length???
«
Reply #4 on:
April 13, 2011, 12:44:56 PM »
I have not reloaded rilfe but I am actually going to get a press this week and start reloading. I have a friend that reloaded for me but he sold his equipment. Do you have any load suggetions for the 300 win mag that I might start with and see if I can get some improvement? I sure appreciate your input, Thanks.
Logged
Lucas B.
Global Moderator
Sr. Member
Posts: 383
Re: Barrel length???
«
Reply #5 on:
April 13, 2011, 09:55:32 PM »
In my 300wm (Sako TRG) I'm running 76.3gr H-1000, 208 A-Max bullets (good priced) in Winchester brass, and Remington 9 1/2 Magnum primers .020" off the lands. Load runs 2840fps.... Very Accurate! Start low and work up!
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> Forum Requests
=> Video
=> Classified Ads
=> Gallery
=> Tree Stands, Ground Blinds, Spot-n-Stalk!
=> Bullets and Reloading
=> Ballistics
=> Long Range Hunting
=> Scope's
=> Rifles
=> General Discussion
=> Gun Laws and Politics